Filter
Top Products
G
ENERAL
C
OMMANDS
4-27
disable
This command returns to Normal Exec mode from privileged mode. In
normal access mode, you can only display basic information on the
switch's configuration or Ethernet statistics. To gain access to all
commands, you must use the privileged mode. (See “Understanding
Command Modes” on page 4-7.)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
The “>” character is appended to the end of the prompt to indicate
that the system is in normal access mode.
Example
Related Commands
enable (4-26)
configure
This command activates Global Configuration mode. You must enter this
mode to modify any settings on the switch. You must also enter Global
Configuration mode prior to enabling some of the other configuration
modes, including Interface Configuration, Line Configuration, VLAN
Database Configuration, and Multiple Spanning Tree Configuration. (See
“Understanding Command Modes” on page 4-7.)
Default Setting
None
Command Mode
Privileged Exec
Console#disable
Console>