SNMP C
OMMANDS
4-123
show access-group
This command shows the port assignments of ACLs.
Command Mode
Privileged Executive
Example
SNMP Commands
Controls access to this switch from management stations using the Simple
Network Management Protocol (SNMP), as well as the error types sent to
trap managers.
Console#show access-group
Interface ethernet 1/25
IP standard access-list david
IP access-list jerry
Console#
Table 4-37 SNMP Commands
Command Function Mode Page
show snmp Displays the status of SNMP
communications
NE,
PE
4-124
snmp-server
community
Sets up the community access string to
permit access to SNMP commands
GC 4-125
snmp-server contact Sets the system contact string GC 4-126
snmp-server location Sets the system location string GC 4-126
snmp-server host Specifies the recipient of an SNMP
notification operation
GC 4-127
snmp-server enable
traps
Enables the device to send SNMP traps
(i.e., SNMP notifications)
GC 4-129