Filter
Top Products
VLAN C
OMMANDS
4-201
Command Usage
All ports assigned to a secondary (i.e., community) VLAN can pass
traffic between group members, but must communicate with resources
outside of the group via promiscuous ports in the associated primary
VLAN.
Example
switchport private-vlan isolated
Use this command to assign an interface to an isolated VLAN. Use the no
form to remove this assignment.
Syntax
switchport private-vlan isolated isolated-vlan-id
no switchport private-vlan isolated
isolated-vlan-id - ID of isolated VLAN. (Range: 1-4094).
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
Host ports assigned to a isolated VLAN cannot pass traffic between
group members, and must communicate with resources outside of the
group via a promiscuous port.
Example
Console(config)#interface ethernet 1/3
Console(config-if)#switchport private-vlan host-association 3
Console(config-if)#
Console(config)#interface ethernet 1/3
Console(config-if)#switchport private-vlan isolated 3
Console(config-if)#