SMC Networks SMC8748L2 Switch User Manual


 
B
ASIC
C
ONFIGURATION
3-15
CLI – Use the following command to display version information.
Displaying Bridge Extension Capabilities
The Bridge MIB includes extensions for managed devices that support
Multicast Filtering, Traffic Classes, and Virtual LANs. You can access these
extensions to display default settings for the key variables.
Field Attributes
Extended Multicast Filtering Services – This switch does not
support the filtering of individual multicast addresses based on GMRP
(GARP Multicast Registration Protocol).
Traffic Classes – This switch provides mapping of user priorities to
multiple traffic classes. (Refer to “Displaying Private VLAN Interface
Information” on page 3-149.)
Static Entry Individual Port – This switch allows static filtering for
unicast and multicast addresses. (Refer to “Setting Static Addresses”
on page 3-108.)
VLAN Learning – This switch uses Shared VLAN Learning (SVL),
where all VLANs share the same address table.
Configurable PVID Tagging – This switch allows you to override
the default Port VLAN ID (PVID used in frame tags) and egress status
(VLAN-Tagged or Untagged) on each port. (Refer to “VLAN
Configuration” on page 3-129.)
Console#show version 4-80
Serial number: 0012CF0B0D00
Service tag:
Hardware version: R01
Module A type: XGBase
Module B type: not present
Number of ports: 49
Main power status: not present
Redundant power status: down
Loader version: 1.0.0.5
Boot ROM version: 1.0.0.5
Operation code version: 2.3.0.2
Console#