C
OMMAND
L
INE
I
NTERFACE
4-104
dot1x system-auth-control
This command enables IEEE 802.1X port authentication globally on the
switch. Use the no form to restore the default.
Syntax
[no] dot1x system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Example
dot1x default
This command sets all configurable dot1x global and port settings to their
default values.
Syntax
dot1x default
Command Mode
Global Configuration
Example
Console(config)#dot1x system-auth-control
Console(config)#
Console(config)#dot1x default
Console(config)#