Filter
Top Products
F
LASH
/F
ILE
C
OMMANDS
4-83
Flash/File Commands
These commands are used to manage the system code or configuration
files.
copy
This command moves (upload/download) a code image or configuration
file between the switch’s flash memory and a TFTP server. When you save
the system code or configuration settings to a file on a TFTP server, that
file can later be downloaded to the switch to restore system operation. The
success of the file transfer depends on the accessibility of the TFTP server
and the quality of the network connection.
Syntax
copy file {file | running-config | startup-config | tftp | unit}
copy running-config {file | startup-config | tftp}
copy startup-config {file | running-config | tftp}
copy tftp {file | running-config | startup-config |
https-certificate | public-key}
copy unit file
• file - Keyword that allows you to copy to/from a file.
• running-config - Keyword that allows you to copy to/from the
current running configuration.
• startup-config - The configuration used for system initialization.
• tftp - Keyword that allows you to copy to/from a TFTP server.
Table 4-25 Flash/File Commands
Command Function Mode Page
copy Copies a code image or a switch configuration
to or from flash memory or a TFTP server
PE 4-83
delete Deletes a file or code image PE 4-86
dir Displays a list of files in flash memory PE 4-87
whichboot Displays the files booted PE 4-88
boot system Specifies the file or image used to start up the
system
GC 4-89