Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-90
Example
Related Commands
dir (4-87)
whichboot (4-88)
Authentication Commands
You can configure this switch to authenticate users logging into the system
for management access using local or remote authentication methods. You
can also enable port-based authentication for network client access using
IEEE 802.1X.
Authentication Sequence
Console(config)#boot system config: startup
Console(config)#
Table 4-27 Authentication Commands
Command Group Function Page
Authentication
Sequence
Defines logon authentication method and
precedence
4-90
RADIUS Client Configures settings for authentication via a
RADIUS server
4-93
TACACS+ Client Configures settings for authentication via a
TACACS+ server
4-98
Port Security Configures secure addresses for a port 4-100
Port Authentication Configures host authentication on specific ports
using 802.1X
4-103
Table 4-28 Authentication Sequence
Command Function Mode Page
authentication login Defines logon authentication method
and precedence
GC 4-91
authentication enable Defines the authentication method and
precedence for command mode change
GC 4-92