Filter
Top Products
C
OMMAND
L
INE
I
NTERFACE
4-202
switchport private-vlan mapping
Use this command to map an interface to a primary VLAN. Use the no
form to remove this mapping.
Syntax
switchport private-vlan mapping primary-vlan-id
no switchport private-vlan mapping
primary-vlan-id - ID of primary VLAN. (Range: 1-4094, no leading
zeroes).
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
Promiscuous ports assigned to a primary VLAN can communicate with
any other promiscuous ports in the same VLAN, and with the group
members within any associated secondary VLANs.
Example
show vlan private-vlan
Use this command to show the private VLAN configuration settings on
this switch.
Syntax
show vlan private-vlan mapping [community | isolated | primary]
• community – Displays all community VLANs, along with their
associated primary VLAN and assigned host interfaces.
• isolated – Displays an isolated VLAN, along with the assigned
promiscuous interface and host interfaces. The Primary and
Console(config)#interface ethernet 1/2
Console(config-if)#switchport private-vlan mapping 2
Console(config-if)#