Filter
Top Products
Glossary-1
G
LOSSARY
Access Control List (ACL)
ACLs can limit network traffic and restrict access to certain users or
devices by checking each packet for certain IP or MAC (i.e., Layer 2)
information.
Boot Protocol (BOOTP)
BOOTP
is used to provide bootup information for network devices,
including IP address information, the address of the TFTP server that
contains the devices system files, and the name of the boot file.
Class of Service (CoS)
CoS is supported by prioritizing packets based on the required level of
service, and then placing them in the appropriate output queue. Data is
transmitted from the queues using weighted round-robin service to
enforce priority service and prevent blockage of lower-level queues.
Priority may be set according to the port default, the packet’s priority bit
(in the VLAN tag), TCP/UDP port number, or DSCP priority bit.
Differentiated Services Code Point Service (DSCP)
DSCP uses a six-bit tag to provide for up to 64 different forwarding
behaviors. Based on network policies, different kinds of traffic can be
marked for different kinds of forwarding. The DSCP bits are mapped to
the Class of Service categories, and then into the output queues.
Domain Name Service (DNS)
A system used for translating host names for network nodes into IP
addresses.