Filter
Top Products
D 13954.01
MAY 2006
111
TANDBERG 1700 MXP
USER GUIDE
IP Settings (II)
Control Panel > Network Settings > LAN Settings
ETHERNET SPEED
Auto. The codec will auto-detect the speed/du-
plex on the LAN.
10/Half. The codec will connect to the LAN using
10Mbps speed / Half Duplex.
10/Full. 10 Mbps speed / Full Duplex.
100/Half. 100 Mbps speed / Half Duplex.
100/Full. 100 Mbps speed / Full Duplex.
IP ACCESS PASSWORD
By setting an IP Access Password on the sys-
tem, all access to the system using IP (Telnet,
FTP and WEB) requires a password. The default
IP Access Password is “TANDBERG”.
Touch tones Snapshot
Camera Presets
Upper part of menu is explained on the previous page.
CANCEL
Select this icon and press OK
to leave the menu undoing any
changes.
RESTORE DEFAULTS
Select this icon and press OK
to restore the default settings.
SAVE & RESTART
Select this icon and press OK
to leave the menu restarting
the system to put IP Setting
changes into effect.
SAVE
Select this icon and press OK to leave
the menu saving the changes. Note
that restart is needed to put changes
into effect here!
DNS DOMAIN NAME
DNS Domain Name is the default domain name
suffix which is added to unqualified names.
Example: DNS Domain Name is “example.com”,
and the name to lookup is “videosystem” will
result in a “videosystem.example.com” DNS
lookup.
DNS SETTINGS
DNS Server 1–5. DNS Server defines the network
addresses for DNS servers. Up to 5 addresses
may be specified. If the network addresses are
unknown, please contact your administrator or
Internet Service Provider.
Touch tones Snapshot
Camera Presets
IP SETTINGS
Remember to restart the system after making changes
to IP Settings. Click on the icon to do this. Changes in
IP Settings menu will have no effect until the system
is restarted.
Touch tones Snapshot
Camera Presets