Filter
Top Products
D 13954.01
MAY 2006
133
TANDBERG 1700 MXP
USER GUIDE
GETTING TO THIS MENU
LOST IN TRANSLATION? Click on the Phone
Book icon 5 times followed by pressing
the number key 1 on the remote control to
reset the menu language to English.
Press OK to produce the below menu.
Use the Arrow keys to move to the
Control Panel.and press OK.
The Control Panel will now be displayed
Use the Arrow keys to navigate to
Diagnostics.
Diagnostics – an Overview
Control Panel
The Diagnostics allows testing of
individual system components
and displays the current system
settings.
SYSTEM INFORMATION
Select System Information to view system
numbers, line status, software version,
hardware serial number and other useful
information. Press arrow key up and down
to scroll in the System Information list.
CALL STATUS
Comprehensive information about the
call is available through the Call Status
window. The menu has two columns, one
for transmitted and one for received audio/
video/data information. If Dual Stream or
MultiSite is available on your system and
in use, pressing the Vertical Arrow keys will
show one page per connected site.
DETAILED CALL STATUS
Provides more detailed information on
packet loss and jitter.
SYSTEM SELFTEST
The system performs a check to determine
internal hardware integrity. System Selftest
is useful when you want to check if your
network connection is active.
VIEW ADMINSTRATOR SETTINGS
This window displays all the system set-
tings. Use the Arrow keys on the remote
control to scroll through the list.
IP ADDRESS CONFLICT CHECK
The system will give a warning if there is an
IP conflict. You may initiate this check by
selecting IP Address Conflict Check.
WARNINGS
Any warnings registered by the system will
be displayed in the Warnings menu. Open a
warning in the list to get more information
about the warning.
GETTING TO THIS MENU