Filter
Top Products
D 13954.01
JUNE 2006
14
TANDBERG 1700 MXP
USER GUIDE
Waking Up the System
Getting Acquainted with the System
Wake up the system by picking up the remote control.
The system will now produce the Welcome screen. The welcome screen
presents the menu and displays your main camera image in the
background (display main camera is the default setting).
The IP number and the system name are displayed in the upper
right corner. The IP Number is the dial-in number of the system.
The welcome screen provides you with system information:
• System Name
• Your IP Address or IP Number
• Indications of Missed Calls or Warnings, if applicable.
You may customize the text on the welcome screen. See Menu Settings for how to edit the welcome text.
The Remote Control Unit
If the System Fails to Respond
Make sure that the system is connected to mains.
Make sure the Remote Control has working batteries.
•
•
Presentation key switches to a predefined pres-
entation source. If the Presentation key is held
down for 1 second then the Presentation video
sources menu will appear.
Arrow keys are used to navigate in the menus.
Use Zoom + and – to zoom the camera in and out.
Selfview displays your outgoing video. Press
again to turn off.
Cancel takes you back one step in the menu sys-
tem, i.e. to leave a menu undoing any changes.
Use Cancel to delete characters in an input field.
Press and hold the Cancel key for 1 second to
close the menu.
Use the Phone Book to store and recall video
contacts for easy placement of calls.
Use the End Call key to end the current call.
Pressing this key when not in a call will place the
system in Standby mode.
Mic Off turns your microphone
on and off.
Volume + and – adjusts the
volume.
Press OK to show the menu
and select menu items.
Layout key toggles between full
screen and different display
layouts.
Press the Call key to place a call.
Presets Not used on 1700 MXP.
The Alphanumerical keypad
functions in the same manner
as a cellular phone.
Snapshot takes a snap-
shot, but only during a call.
Press Touch tones when you are in a call and need to
dial extension numbers etc. Press the OK button to
exit Touch tones.
Even Incoming Calls Wake Up the System!
When the system is not in use, it is in standby mode and the
screen is black. An incoming call or pressing any key on the
remote control will also wake up the system. Restrictions ap-
ply when the Do not disturb function has been activated.
Remote Control Navigation Basics
Arrow keys. Navigate in the menu with the Arrow keys. The
orange selector on screen shows the selected item. Press
OK to select.
Cancel key. In the main menu, pressing Cancel will hide the
menu. If the menu is hidden, bring it back
with OK. In other menus, pressing Cancel
takes you one step back. In an input field,
pressing Cancel will delete characters/num-
bers to the left.
Back/Cancel key. The icon corresponds
to the Cancel key on the remote.
Touch tones Snapshot
Presets
Touch tones Snapshot
Presets
Waking Up the System