TANDBERG 1700 MXP Computer Monitor User Manual


 
D 13954.01
MAY 2006
129
TANDBERG 1700 MXP
USER GUIDE
Restore Default Settings (I)
Control Panel > Restore Default Settings
LOST IN TRANSLATION? Click on the Phone
Book icon 5 times followed by pressing
the number key 1 on the remote control to
reset the menu language to English.
Press OK to produce the below menu.
Use the Arrow keys to move to the
Control Panel and press OK.
Use the Arrow keys to move to Restore
Default Settings, if applicable. Press OK.

Whilst the Restore Defaults icon is
highlighted press OK to restore the
default setting. You will be prompted to
confirm your intentions.
SystemUnit Name: “”
SystemUnit InternationalName: “”
SystemUnit DisplayName: “”
OptionKey Features: “”
OptionKey Bandwidth: “”
SerialPort 1 BaudRate: 9600
SerialPort 1 Parity: None
SerialPort 1 DataBits: 8
SerialPort 1 StopBits: 1
SerialPort 1 Mode: Control
Ethernet 1 Speed: Auto
Ethernet 2 Speed: Auto
IPProtocol: IPv4
IP Assignment: DHCP
IP Address: “127.0.0.1”
IP V6 Address: “”
IP SubnetMask: “255.255.255.0”
IP Gateway: “127.0.0.1”
IP DNS Server 1 Address: “”
IP DNS Server 2 Address: “”
IP DNS Server 3 Address: “”
IP DNS Server 4 Address: “”
IP DNS Server 5 Address: “”
IP DNS Domain Name: “”
H323Gatekeeper Discovery: Auto
H323Gatekeeper Address: “”
H323Gatekeeper Authentication Mode: Off
H323Gatekeeper Authentication ID: “”
H323Gatekeeper MultipleAlias: Off
CallManager Address: “”
H323CallSetup Mode: Direct
H323Prefix: “”
NAT Mode: Off
NAT Address: “127.0.0.1”
IPMedia MaxVideoTXRate: 1920
RTP Ports: Dynamic
RTP MTU: 1300
QoS Precedence Telephony Audio: Auto
QoS Precedence Telephony Signalling: Auto
QoS Precedence VideoTelephony Audio: Auto
QoS Precedence VideoTelephony Signalling: Auto
QoS Precedence VideoTelephony Video: Auto
QoS Precedence VideoTelephony Data: Auto
QoS Diffserv Telephony Audio: 0
QoS Diffserv Telephony Signalling: 0
QoS Diffserv VideoTelephony Audio: 0
QoS Diffserv VideoTelephony Signalling: 0
QoS Diffserv VideoTelephony Video: 0
QoS Diffserv VideoTelephony Data: 0
QoS Mode: Precedence
QoS ToS: Off
QoS RSVP: Off
NetProfile 1 Name: “”
NetProfile 1 CallPrefix: “”
NetProfile 1 CallSuffix: “”
NetProfile 1 Network: Auto
NetProfile 2 Name: “”
NetProfile 2 CallPrefix: “”
NetProfile 2 CallSuffix: “”
NetProfile 2 Network: Auto
NetProfile 3 Name: “”
NetProfile 3 CallPrefix: “”
NetProfile 3 CallSuffix: “”
NetProfile 3 Network: Auto
NetProfile 4 Name: “”
NetProfile 4 CallPrefix: “”
NetProfile 4 CallSuffix: “”
NetProfile 4 Network: Auto
Continued overleaf...
RESTORING DEFAULT SETTINGS
The Default Settings