Filter
Top Products
D 13954.01
MAY 2006
119
TANDBERG 1700 MXP
USER GUIDE
SNMP Settings
Control Panel > Network Settings > LAN Settings
Note! The SNMP Community name is
case sensitive. The default password is
public
Touch tones Snapshot
Camera Presets
CANCEL
Select this icon and press OK
to leave the menu undoing any
changes.
RESTORE DEFAULTS
Select this icon and press OK
to restore the default settings.
SAVE
Select this icon and press
OK to leave the menu putting
changes into effect.
SNMP TRAP HOST
Identifies the IP-address of the SNMP manager.
SNMP (Simple Network Management Protocol,
SNMP Ver 1) is used to monitor and configure
different entities in a network. The system’s
SNMP Agent responds to requests from SNMP
Managers (a PC program etc.). SNMP traps are
generated by the agent to inform the manager
about important events.
Traps can be sent to multiple SNMP Trap Hosts.
Enter the IP address of up to three SNMP man-
agers. All traps will then be sent to the hosts
listed.
SNMP COMMUNITY
Used to authenticate SNMP requests. SNMP
requests must have a ‘password’ in order to
receive a response from the SNMP agent in the
codec.
Touch tones Snapshot
Camera Presets