Filter
Top Products
BioOptix™ 10
Appendix A Method Templates
A-2
2. From Notepad’s menu select File>Open.
3. Change the Files of type pull-down list to All files.
4. Use the Open dialog box to locate the Standard.tpl file.
Default installations of BioOptix 10 software place this in
the Program Files folder on the hard drive. Typically the
path is C:\Program Files\BioOptix 10\Standard.tpl.
Notepad will then display the contents of the template file. The
Standard.tpl file installed with the BioOptix 10 software is
shown in Figure A-1.
Figure A-1 Installed Standard.tpl file
Tip: You can instruct Windows to always open a .tpl file with Notepad
or other text editor. To do so:
1. Open Windows Explorer and locate the file named Stan-
dard.tpl.
2. Highlight the file and right-click to display menu options.
3. Select the Open With... option. Windows will display a list
of programs.
4. Highlight Notepad or the preferred text editor.
[Blocks]
Count=5
[Block1]
Name="Equilibrate"
Type="Fluid"
AskPause="Yes"
[Block2]
Name="Load"
Type="Load"
AskPause="Yes"
[Block3]
Name="Wash"
Type="Fluid"
AskPause="Yes"
[Block4]
Name="Elute"
Type="Gradient"
AskPause="No"
[Block5]
Name="Post Run"
Type="Fluid"
AskPause="No"
[Other]
Wavelength=280