Filter
Top Products
3-4
MAKING COPIES
About the scan head
The scan head lamp remains on constantly when the unit is in the ready condition
(when the start (
) indicator is illuminated).
The unit adjusts the scan head lamp periodically to maintain copying quality. At this time, the scan head
moves automatically. This is normal and does not indicate unit trouble.
Initial settings of operation panel
When the unit power is on, the operation panel will revert to the initial settings when the time set with the
“Auto clear time” setting (p. 4-2) elapses after a copy or scanner job is finished, or when the clear (
) key
is pressed twice.
The initial settings of the operation panel are shown below.
When copying is begun in this state, the settings in the following table are used.
Copy quantity 1 copy
Exposure adjustment AUTO
Zoom 100%
Power off methods
If not used for a certain period of time, the unit will automatically enter auto power shut-off mode (p. 4-3) in
order to minimise power consumption. In cases where the machine will not be used for a long time, turn off
the power switch and remove the power cord from the outlet.