3
User safety
This Toshiba digital plain paper copier does not produce laser radiation hazardous to the
user. It is certified as a Class 1 laser product under the U.S.Department of Health and
Human Services (DHHS) Radiation Performance Standard according to the Radiation
Control Health and Safety Act of 1968.
Protective housing and external covers completely confine the laser light emitted inside
the plain paper copier. The laser beam cannot escape from the machine during any
phase of user operation.
Regulations implemented on August 2, 1976 by the Bureau of Radiological Health (BRH)
of the U.S.Food and Drug Administration apply to laser products manufactured from
August 1, 1976. Laser products marketed in the United States must comply with these
regulations.
CAUTION : Using controls or adjustments or performing procedures, other than those
specified herein may result in hazardous radiation exposure.
Ozone information
After a suitable place has been selected for the installation, please do not change it. Avoid
excessive heat dust vibration and direct sunlight. Also, provide proper ventilation as the
copier emits a small amount of ozone.
A small amount of ozone is produced within the unit during operation. The
emission level is insufficient to cause any health hazard.
Note:
The present recommended long term exposure limit for ozone is 0.1ppm (0.2mg/m
3
)
calculated as an 8hr. time-weighted average concentration.
However, since the small amount that is emitted may have an objectionable odor, it
is advisable to place the unit in a ventilated area.
Machine noise information
Ordinance 3. GSGV, January 18, 1991: The maximum sound pressure level is equal or
less than 70 dB(A) according to EN27779.
For user in the Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
For user in the Europe
1. Do not touch the connector terminal when disconnecting the cables of peripheral
equipment.
2. Before opening any covers or removing any units from the copier, discharge the static
electricity from your body by touching a metal part of the copier.
This product is carrying the CE-Mark in accordance with the related European Directives.
Responsible for CE-marking is TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH,
Carl-Schurz-Str.7, 41460 Neuss, Germany.
e-mail :
customerservice@toshibatec-tgis.com.