Filter
Top Products
4-4
SPECIAL FUNCTIONS
4
Select the desired parameter using the copy quantity ( ) key. The entered parameter
number will blink on the right of the display.
* Factory default settings are indicated with an asterisk (*).
5
Press the start ( ) key. The right-hand number in the display will be steadily lit and the
entered value will be stored.
To change the setting or to set another mode, press the clear ( ) key. The unit will return
to step 2.
6
Press the light ( ) or dark ( ) key to return to the normal copy mode.
DISPLAYING TOTAL NUMBER OF COPIES
Use the following procedure to display the total number of copies.
1
Press the clear ( ) key to reset the display to zero.
2
Press and hold down the clear ( ) key for approximately 5 seconds. The total number of
copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
Program
No.
1
2
3
4
5
6
Mode
Auto clear time
Preheat mode
Auto power shut- off timer
Stream feeding mode
Auto power shut- off mode
Resolution of AUTO &
MANUAL mode
Parameters
0 -> OFF, 1 -> 10 sec., 2 -> 30 sec., *3 -> 60 sec.,
4 -> 90 sec., 5 -> 120 sec.
*0 -> 30 sec., 1 -> 60 sec., 2 -> 90 sec.
0 -> 2 min, *1 -> 5 min., 2 -> 15 min., 3 -> 30 min.,
4 -> 60 min., 5 -> 120 min.
0 -> OFF, *1 -> ON
0 -> OFF, *1 -> ON
*0 -> 300 dpi, 1 -> 600 dpi