Filter
Top Products
3-6
MAKING COPIES
SET THE COPY QUANTITY
Set the number of copies using the two copy quantity ( , ) keys when copying from the original
table.
•
Press the clear ( ) key to clear an entry if a mistake is made.
•
A single copy can be made with the initial setting, i.e., when “1” is displayed.
• Press the key to count up the copy quantity from 1 to 99. (A fast countup will
be carried out while you press and hold down the
key.)
Also, if the
key is pressed while 99 appears, the copy quantity becomes 0
and the count from 1 to 99 is restarted.
• If the
key is pressed, the copy quantity becomes 0 and is counted down from
99 to 1. (A fast countdown will be carried out while you press and hold down the
key.)
• When the
key is pressed during copying, the number of copies is displayed.
EXPOSURE ADJUSTMENT/PHOTO COPYING
Exposure adjustment
Copy density adjustment is not required for most originals in the automatic exposure mode. To adjust the
copy density manually or to copy photographs, the exposure level can be adjusted in five steps manually.
The copy resolution used for AUTO and MANUAL ( ) mode can be changed. (p. 4-3)
1
Press the exposure mode selector key to select the MANUAL
( ) mode or PHOTO ( ) mode.
2
Use the light ( ) and dark ( ) keys to adjust the exposure level.
If exposure level 2 is selected, the two left-handmost indicators for that
level will light up simultaneously. Also, if level 4 is selected, the two
right-handmost indicators for that level will light up simultaneously.