Filter
Top Products
6-4
TROUBLESHOOTING
If paper is misfed here, proceed to "A:
Misfeed in the paper feed area". (p.32)
If paper is misfed here, proceed to "B:
Misfeed in the fusing area". (p.32)
If the misfed paper is seen from
this side, proceed to "C: Misfeed
in the transport area". (p.33)
MISFEED REMOVAL
When the misfeed ( ) indicator blinks or in the display, the unit will stop because of a misfeed.
1
Open the side cover, in that order.
To open the side cover, see “TONER CARTRIDGE REPLACEMENT” (p. 5-2)
2
Check the misfeed location. Remove the misfed paper following the instructions for each
location in the illustration below. If the misfeed ( ) indicator blinks, proceed to “A: Missfeed
in the paper feed area” (p. 6-5).