Filter
Top Products
2. SYSTEM MODE EO13-33002
(Revision Date: Mar. 26, 2009)
2.1 Self-diagnostic Test
2- 9
Item # Description Specification
RIBBON (32) Ribbon type selection TRANS: Transparent ribbon
NON TRANS: Non transparent ribbon
PEEL OFF STATUS (33) Strip wait status selection ON: Available
OFF: Unavailable
FEED KEY (34) Feed key function FEED: Feeds one label
PRINT: Prints image buffer on one label
KANJI (35) Kanji code type (Not supported by QM model) TYPE 1: Windows code
TYPE 2: Original code
EURO CODE (36) Euro font code 20H to FFH
AUTO HD CHK (37) Auto print head broken element check ON: Available
OFF: Unavailable
ACK/BUSY (38) Centronics interface ACK/BUSY timing setting TYPE1: A rise of ACK signal and a release
of BUSY occur at the same time.
TYPE2: A fall of ACK signal and a release
of BUSY occur at the same time.
WEB PRINTER (39) Web printer function ON: Available
OFF: Unavailable
SENS POSI (40) Media sensor CENTER: Fixed sensor
EDGE: Movable sensor
INPUT PRIME (41) Input prime selection
(Reset operation when INIT signal is ON)
ON: Available
OFF: Unavailable
EX. I/O MODE (42) Expansion I/O interface operating mode TYPE1: Standard mode
TYPE2: Inline mode
PLUG&PLAY (43) Plug & Play setting ON: Available
OFF: Unavailable
LBL/RBN END (44) Print processing setting at the label/ribbon error detection TYP1: Printing is paused in the middle of
printing.
TYP2: Printing is paused after the label is
issued.
PRE PEEL OFF (45) Pre-Strip setting OFF: Unavailable
BACK SPEED (46) Reverse Feed Speed setting STD: 3”/second
LOW: 2”/second
MAXI CODE SPEC. (47) MAXI code specification selection TYPE1: Compatible with the current
version
TYPE2: Special specification
PEEL OFF TRQ (48) Strip motor torque R0: Standard
STABILIZER (49) Stabilizer function ON: Stabilizer function is used.
OFF: Stabilizer function is not used.
AUTO CALB. (50) Automatic calibration OFF: Disabled
ON TRANS: Enabled with the transmissive
sensor
ON REFLECT: Enabled with the reflective
sensor
LAN (51) Enabling or disabling the LAN ON SNMP ON: LAN Enabled
SNMP Enabled
ON SNMP OFF: LAN Enabled
SNMP Disabled
OFF: LAN Disabled
PRTR IP ADDRESS (52) Printer IP address ***.***.***.***
GATE IP ADDRESS (53) Gateway IP address ***.***.***.***
SUBNET MASK (54) Subnet mask ***.***.***.***
MAC ADDRESS (55) MAC (Media Access Control) address for LAN controller
on the MAIN PC Board
¶¶-¶¶-¶¶-¶¶-¶¶-¶¶
TTF AREA (56) True type font registration area size 0 KB to 3072 KB (unit of 128 KB)
EXT CHR AREA (57) External character registration area size 0 KB to 3072 KB (unit of 128 KB)
BASIC AREA (58) BASIC file store area size 0 KB to 1792 KB (unit of 128 KB)
PC SAVE (59) PC saving area size 0 KB to 3072 KB (unit of 128 KB)
SOCKET PORT (60) Socket port number ON: Available
OFF: Unavailable
Port No. 0 to 65535