Filter
Top Products
2. SYSTEM MODE EO13-33002
2.7 IP Address Setting
2-68
2.7.2 Socket Port Setting
To set a socket port number, follow the procedure below.
2.7.3 DHCP and DHCP Client ID Setting
To set the DHCP and the DHCP client ID, follow the procedure below.
Enter the 5th digit of the port number with the
[RESTART] or [FEED] key. Pressing the
[PAUSE] key allows the 4th digit setting.
Repeat this procedure until the 1st digit setting
has been completed.
PORT ON 08000
<7>IP ADDRESS
DHCP
PORT ON 08000 PORT OFF -----
PORT ON 08000
PORT ON 08000
SOCKET PORT
[RESTART] or [FEED]
[PAUSE]
[PAUSE]
Enter a number for each digit of the port number
with the [RESTART] or [FEED] key.
[
PAUSE
]
[PAUSE]
<7>IP ADDRESS
DHCP ON
<7>IP ADDRESS
DHCP CLIENT ID
<7>IP ADDRESS
DHCP
<7>IP ADDRESS
DHCP OFF
[
PAUSE
]
[PAUSE]
[RESTART] or [FEED]
MODE ASCII
DHCP CLIENT ID
MODE HEX
DHCP
4142434445464748
494A4B4C4D4E4F50
[PAUSE]
[PAUSE]
[FEED] or [RESTART]
[PAUSE]
Hex. Code
MODE ASCII
ABCDEFGHIJKLMNOP
A
SCII Code
[PAUSE]
[PAUSE]
Enter a character or a value for each of 1st byte to 16th byte
sequentially using the [FEED] or [RESTART] key.