Filter
Top Products
3. ON LINE MODE EO13-33002
3.1 Automatic Threshold Setting
3- 4
3.1 Automatic Threshold Setting
Outline of Automatic Threshold Setting
To maintain a constant print position the printer uses the media sensor to detect a print start position
according to the difference of voltage between a print area and a gap or black mark. When the media is
pre-printed, the darker (or more dense) inks can interfere with this process, causing “PAPER JAM” errors
even if the media is not actually jammed.
To get around this problem, first, try an automatic threshold setting.
If the problem still occurs, then, the threshold voltage needs to be manually set. (Refer to Section 2.3.7.)
How to Perform an Automatic Threshold Setting
NOTES: 1. Failure to feed more than 1.5 labels may result in an incorrect threshold setting.
2. While the Top Cover is raised, the [PAUSE] key does not work.
[PAUSE]
Press and hold the [PAUSE]
key until more than 1.5 labels
(tags) have been fed.
Load pre-printed media in the printer.
REFLECTIVE
B-SX8T Vx.x
TRANSMISSIVE
B-SX8T Vx.x
ON LINE
B-SX8T Vx.x
Press and hold the [PAUSE] ke
y
for 3 seconds or longer.
PAUSE
B-SX8T Vx.x
[FEED]
[RESTART]
Press and hold the [PAUSE]
key until more than 1.5 labels
(tags) have been fed.
PAUSE
B-SX8T Vx.x
ON LINE
B-SX8T Vx.x
[RESTART]
During this media feed,
a threshold is
automatically set.