Filter
Top Products
2. SYSTEM MODE EO13-33002
(Revision Date: May 22, 2007)
2.6 RAM Clear
2-61
2.6 RAM Clear
Outline of RAM Clear
In the RAM Clear mode, clearing the Maintenance Counter and initializing the Parameters are possible.
After replacing the print head, ribbon motor, or platen, perform a maintenance clear.
The RAM Clear menu contains the following:
How to Enter RAM Clear Mode
Turn on the printer while pressing the [FEED] and [PAUSE] keys at the same time. Hold both keys until the
“<1>DIAG. Vx.x” Message appears.
Press the [FEED] key 5 times. The printer is at the start of the RAM Clear menu.
<1>DIAG. Vx.x
<6>RAM CLEAR
<6>RAM CLEAR
NO RAM CLEAR
<6>RAM CLEAR
MAINTE.CNT CLEAR
<6>RAM CLEAR
PARAMETER CLEAR
<6>RAM CLEAR
No RAM Clear
[PAUSE]
[FEED]
[FEED]
[FEED]
Maintenance Counter Clear
Parameter Clear
[RESTART]
[RESTART]
[RESTART]
ALL CLEAR
[FEED]
[RESTART]
FEED&PRINT CLEAR
[FEED]
[RESTART]
CUT CLEAR
*** COMPLETE ***
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
B-SX6T and
B-SX8T (V1.0B or earlier)
B-SX8T (V1.1 or greater)
Turn off the printer to exit this mode.
[PAUSE]