Filter
Top Products
2. SYSTEM MODE EO13-33002
2.4 Test Print
2-51
Media Length Setting
Select a label length for the test print from a range of 5 mm to 999 mm.
[FEED] key: Pressing the [FEED] key one time causes a –1 mm change, up to 5 mm.
[RESTART] key: Pressing the [RESTART] key one time causes a +1 mm change, up to 999 mm.
After selecting a media length, press the [PAUSE] key to go to Paper Feed Selection.
NOTE: Pressing and holding the [RESTART] or [FEED] key causes the display to show the values quickly
and continuously. To stop it, release the key.
Paper Feed Selection
Select whether or not a paper feed is performed prior to a test print.
After selecting whether to perform a paper feed, press the [PAUSE] key. The display returns to the
“<4>TEST PRINT”.
NOTE: When “PAPER FEED” is selected, the printer feeds the media prior to a test print to adjust the
print start position. When “PAPER NO FEED” is selected, the printer starts printing without
print start position adjustment. If the print start position adjustment is unnecessary, you can
save the media by selecting “PAPER NO FEED”.
[RESTART]
[FEED]
<4>TEST PRINT
LABEL LEN. 76mm
LABEL LEN. 5mm
LABEL LEN. 999mm
PAPER FEED
PAPER NO FEED
<4>TEST PRINT
PAPER FEED
[RESTART]
[FEED]
Paper feed is performed.
Paper feed is not performed.