Filter
Top Products
3 Diagnostic Programs 3.11Error Codes and Description
68
Satellite E200,Satellite Pro E200, EQUIUM E200,SATEGO E200 Maintenance Manual
28xx 1394
01
Can not find IEEE1394
controller
Don’t support 1394.
20xx IDE-HDD
01 Get Parameter Fail !
Wrong test parameters are input
by user.
Reinput the correct parameters.
02 Write Pattern Error HD is damaged. Send the HD for repair.
03 Data Compare Error HD is damaged. As above.
04 Read Verify Error HD is damaged. As above.
05 Seek Error HD is damaged. As above.
06
Disk Controller Self Test
Failed
The HD controller is damaged. As above.
07
Disk Controller Test
unexpected interrupt
Failed
The HD controller is damaged. As above.
09
Disk Controller action
Test Failed
The HD controller is damaged. As above.
10
Disk dos not support
SMART
Disk dos not support SMART
Change HD which supported
SMART and test again
11
Disk read attribute
threshold error
Disk read attribute threshold
error
Send the HD for repair.
12
Disk read attribute value
error
Disk read attribute value error As above.
13
Disk SMART attribute
value error
Disk SMART attribute value
error
As above.
21xx ODD
01
No Disk in CDROM No disk is found in the CD-
ROM.
Insert a disk into the CD-ROM.
02
The Disk in CDROM is
not Data Disk
The disk in the CD-ROM is not
Data Disk.
Insert a DATA CD.
03
IDE-CD Controller Error Functional errors with the CD-
ROM.
Send the CD-ROM for repair.
04
CD Read Error Either the disk or the CD-ROM
is damaged.
Replace the disk or send the CD-
ROM for repair.
07
CD Seek Error Either the disk or the CD-ROM
is damaged.
Replace the disk or send the CD-
ROM for repair.
09
Eject Error Wrong CD-ROM drive. Exit from the wrong drive.