Filter
Top Products
4.7 Wireless LAN Card 4 Replacement Procedures
4.7 Wireless LAN Card
Removing the Wireless LAN Card
Remove the wireless LAN card according to the following procedures and Figure 4-9.
CAUTION: Do not touch the connectors on the wireless LAN card and in the computer
with your bare hands. Wireless LAN cards can fail if they are contaminated with sweat,
natural oils, etc. from your hands.
1. Disconnect the two antenna cables with tweezers.
2. Remove the one M2x3 black flat head screw securing the wireless LAN card.
3. Pull the wireless LAN card up from CN1300 on the system board and out at an angle.
Black cable
White cable
M2x3 black flat
head screw
Wireless LAN card
CN1300
Figure 4-9 Removing the wireless LAN card
Satellite/E200/E205 Maintenance Manual 4-21