Filter
Top Products
4.19 LCD Module 4.20 CCD Board and MIC
4.20 CCD Board and MIC
Removing the CCD Board and MIC
Remove the FL inverter board according to the following procedures and Figure 4-32.
1. Remove the CCD module with CCD cable from display rear cover.
2. Disconnect the CCD cable from the CCD module connector.
CCD module
CCD cable
MIC cable
Display rear cover
Figure 4-32 Removing the CCD board and MIC
3. Lift the MIC from the display rear cover.
Satellite/E200/E205 Maintenance Manual 4-53