Filter
Top Products
4 Replacement Procedures 4.15 Switch Board and Finger Print Board
4.15 Switch Board and Finger Print Board
Removing Switch Board and Finger Print Board
Remove the Switch Board and Finger Print Board according to the following procedures and
Figure 4-26.
1. Remove one M2x3 black flat head screw securing the switch board.
2. Remove the switch board.
3. Disconnect the switch board flat cable from CN9400 on the switch board.
2. Remove the touch pad hold.
3. Remove the finger print board.
M2x3 black flat
head screw
Switch board
Finger print board
Touch pad holder
Switch board flat cable
CN9400
Figure 4-26 Removing the switch board and finger print board
4-42 Satellite/E200/E205 Maintenance Manual