Filter
Top Products
4.6 Memory Module 4 Replacement Procedures
4.6 Memory Module
Removing the Memory Module
Remove the memory module according to the following procedures and Figures 4-8, after
checking that the computer is turned off in boot mode.
CAUTION: Do not touch the connectors on the memory modules or in the computer.
Contaminated connectors can cause memory access problems.
Memory
Latches
Memory slot
Figure 4-8 Removing the memory module
1. Spread out the two memory lock latches so that the memory module pops up.
2. Pull the memory module up and out at an angle, using care to avoid touching the
connectors.
Satellite/E200/E205 Maintenance Manual 4-19