Filter
Top Products
4 Replacement Procedures 4.8 HDD
2. Remove the HDD pack by pulling on the tab attached to the pack.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
3. Place the HDD pack on a flat surface (such as a desk), and remove the four M3x4
black flat head screws.
4. Place the HDD pack on a flat surface (such as a desk), and remove the chassis.
M3x4 black flat
head screw
HDD
HDD chassis
M3x4 black flat
head screw
Figure 4-11 Removing the HDD chassis
CAUTION: Do not apply pressure to the top or bottom of the drive.
4-24 Satellite/E200/E205 Maintenance Manual