Filter
Top Products
4.21 LED Board and Card Reader Board 4 Replacement Procedures
4.21 LED Board and Card Reader Board
Removing the LED Board and Card Reader Board
Remove the LED Board and Card Reader Board according to the following procedures and
Figure 4-33.
1. Remove two M2x3 black flat head screws and remove the LED lens.
2. Remove one M2x3 black flat head screw and remove the LED board.
3. Disconnect the LED board cable from CN9500 on the LED board.
4. Remove two M2x3 black flat head screws and remove the card reader board.
5. Disconnect the card reader board cable from CN9903 on the card reader board.
M2x3 black flat head screw
M2x3 black flat head screw
LED lens
LED board
LED board cable
Card reader board
Card reader board cable
CN9903
CN9500
Figure 4-33 Removing LED Board and card reader board
Satellite/E200/E205 Maintenance Manual 4-55