Filter
Top Products
4.10 Bluetooth Module 4 Replacement Procedures
4.10 Bluetooth module
Removing the Bluetooth module
NOTICE: Don’t touch the double tape surface for keep double tape surface clean and
adhesive while remove the Bluetooth module from the ODD bracket.
Remove the Bluetooth module according to the following procedures and Figures 4-14.
1. Disconnect the Bluetooth cable from CN2150 on the system board.
2. Remove M1.6x2.5 white flat head screw.
3. Remove the Bluetooth module.
4. Disconnect the Bluetooth cable from the Bluetooth module.
M1 6x2 5 white
flat head screw
..
CN2150
Figure 4-14 Removing the Bluetooth module
Satellite/E200/E205 Maintenance Manual 4-29