Filter
Top Products
4.13 System Board 4 Replacement Procedures
Satellite/E200/E205 Maintenance Manual 4-37
4.13 System Board
Removing the System Board
Remove the System Board according to the following procedures and Figure 4-23, 4-24.
1. Disconnect the light sensor cable from CN202 on system board.
2. Disconnect the RGB cable from CN3050 on system board.
3. Disconnect the RJ45 cable from CN470 on system board.
4. Disconnect the touch pad flat cable from CN280 on system board.
5. Disconnect the switch board cable from CN281 on system board.
6. Disconnect the finger print board cable from CN209 on system board.
7. Turn the top cover upside down.
8. Disconnect the audio board flat cable from CN201 on system board.
9. Disconnect the DC-IN cable from CN6000 on system board.
10. Disconnect the MMB board flat cable from CN200 on system board.
11. Remove three M2x3 black flat head screws.
12. Remove the system board.