Filter
Top Products
4 Replacement Procedures 4.21 LED Board and Card Reader Board
4-56 Satellite/E200/E205 Maintenance
Manual
Installing the LED Board and Card Reader Board
Install the LED Board and Card Reader Board according to the following procedures and
Figure 4-33.
1. Connect the card reader board cable to CN9903 on the card reader board.
2. Seat the card reader board in the correct position and secure it with the two M2x3
black flat head screws.
3. Connect the LED board cable to CN9500 on the LED board.
4. Seat the LED board in the correct position and secure it with the one M2x3 black flat
head screw.
5. Seat the LED lens in the correct position and secure it with the two M2x3 black flat
head screws.