Filter
Top Products
4 Replacement Procedures 4.9 ODD Bay Module
4.9 ODD Bay Module
Removing the ODD Bay Module
NOTE: The installation and removal procedures are the same for all the modules that
can be installed in the ODD bay. See the appropriate sections for the disassembly
procedures of specific modules.
Remove the ODD bay module according to the following procedures and Figures 4-12.
1. Remove the three M2x3 black flat head screws.
2. Push out on the ODD bay module.
CAUTION: Handle the ODD bay module carefully it can become hot during operation.
M2x3 black flat head screw
ODD bay module
Figure 4-12 Removing the ODD bay module
4-26 Satellite/E200/E205 Maintenance Manual