Filter
Top Products
4.15 Switch Board and Finger Print Board 4 Replacement Procedures
Satellite/E200/E205 Maintenance Manual 4-43
Installing Switch Board and Finger Print Board
Install Switch Board and Finger Print Board to the following procedures and Figure 4-26.
1. Seat the finger print board in the correct position.
2. Seat the touch pad hold in the correct position.
3. Connect the switch board flat cable to CN9400 on the switch board.
4. Seat the switch board in the correct position.
5. Secure the switch board with one M2x3 black flat head screw.