Filter
Top Products
xv System requirements
Command WorkStation (option)
To run the Command WorkStation application from a remote workstation, you need:
• A Windows-based computer with a 200MHz Pentium processor
• Windows 95/98/Me, Windows NT 4.0 with NT Service Pack 5, or Windows 2000
• TCP/IP or IPX/SPX networking protocol installed
• A video adapter card with at least 2MB of video memory
• At least 32MB of RAM
• An 850MB (or greater) hard disk drive
• A 17" monitor that supports 16-bit color at a minimum resolution of 1024
x
768
DocBuilder Pro (option)
To run the Command WorkStation application with DocBuilder Pro (both available as
options), you need:
• A Windows-based computer with a 333MHz Pentium processor
• Windows 95/98/Me, Windows NT 4.0 with NT Service Pack 5, or Windows 2000
• TCP/IP networking protocol installed
• A video adapter card with at least 2MB of video memory
• 64MB of RAM
• An 850MB (or greater) hard disk drive
• 90MB of available hard disk space
• A 17" monitor that supports 16-bit color at a minimum resolution of 1024
x
768