Filter
Top Products
30 Installing User Software on a Windows Computer
Setting up SMB printing with Windows NT 4.0 and/or
Windows 2000
If you do not have a Novell network, you can print via SMB printing (also known as
Windows printing or WINS printing). Printer driver installation for SMB printing via
Point and Print is only available for the PostScript driver for Windows 95/98. You will
need to install the drivers using the User Software CD. These instructions assume you
have the TCP/IP Protocol and TCP/IP Printing software installed on the
Windows NT 4.0 workstation.
To set up printing to a second or third connection, you must install a new printer by
repeating the procedure “To set up SMB printing on Window NT 4.0 and/or
Windows 2000” on page 30. If you install more than one printer, give each a
descriptive name during printer driver installation, such as Aero-Print or Aero-Hold, so
you can easily identify printers.
BEFORE YOU BEGIN
• Configure the GA-1040 for SMB printing using TopAccess in other setup options.
SMB printing is referred to as Windows Printing in Setup, on the TopAccess and on
the other tab of the Network Setup page. For more information, see the Configuration
Guide.
TO SET UP SMB PRINTING ON WINDOW NT 4.0 AND/OR WINDOWS 2000
1. Double-click the Network Neighborhood (Windows NT 4.0) or My Network places
(Windows 2000) icon to display your network environment.