Filter
Top Products
B070/B071 3-6 PTM
1. Press the user tools key, then press the key corresponding to the set of user
tools you wish to use.
2. System Settings:
a) Print Priority: If set to Interleave, the machine may start printing pages from another job
after the number of pages selected with ‘Interleave Print’.
b) Interleave Print: See above
c) Function Reset Timer: Also controlled by SP 5913. This is the length of time the
machine waits before changing modes when using the multi-access function. The
default is 3 seconds.
d) Output Tray - Printer: The driver settings will take priority if different from the user tool
setting.
e) System Settings - Key Operator Functions
f) User Code Management: Determines which modes user codes are necessary for
(copier, document server, scanner, printer)
g) External Change Unit Management: Determines which modes key operator code is
necessary for (copier, document server, scanner, printer)
h) Address Book Management: This allows you to administer the user codes. These user
codes are also used for Document Solutions software. E-mail addresses can also be
programmed with the user codes, and scanned documents can be sent by e-mail. E-mail
addresses can also be registered in groups so that a document can be sent to more
than one person at the same time easily.
i) For printer mode, user codes sent from the printer driver can be automatically registered
in the machine as user codes if you set User Code Management (above) for printer
mode to Auto Program.
j) Key Operator’s e-mail Address: This can be stored for reference in times of confusion,
tumult, and chaos.
k) AOF: This enables and disables auto off mode. It is not explained in the operation
manual. This is because, to comply with Energy Star, it should not be easy to disable
this feature.
3. Printer Features, Scanner Features: The printer and scanner options must be
installed.