Filter
Top Products
PTM 2-8 B070/B071
2.1.8 ORIGINAL INVERSION AND FEED-OUT
General Operation
When the scanner reaches the return position, the copier CPU sends the feed-out
signal to the ADF. When the ADF receives the feed-out signal, the transport belt motor
and feed-out motor [A] turn on. The original is then fed out to the exit tray or fed back
to the exposure glass after reversing in the inverter section.
This ADF has two exit trays. For single-sided original mode, the original is fed out
straight out to the right exit tray, but for double-sided original mode, the original is fed
out to the upper exit tray.
This causes the originals to be fed out in the correct order on the exit trays and allows
the maximum one-to-one copy speed for each mode.
B070D926.WMF
[A]