Toshiba E-STUDIO900 Copier User Manual


 
PTM 2-9 B070/B071
Original Inversion
When the ADF receives the original invert signal from the copier, the transport belt
motor, feed-out motor, exit gate solenoid [A], and inverter gate solenoid [B] turn on
and the original is fed back to the exposure glass through the inverter roller [C], exit
gate [D], inverter guide roller [E], inverter gate [F], and inverter roller.
The transport belt motor reverses shortly after the leading edge of the original turns on
the inverter sensor [G], and feeds the original to the left scale.
B070D927.WMF
[C]
[A]
[B]
[F]
[G]
[D]
[E]