Filter
Top Products
PTM 2-4 B070/B071
2.1.4 ORIGINAL FEED
When the leading edge of the original turns the entrance sensor [A] on, the feed-in
clutch [B] turns off and the drive for the feed belt is released. The original is fed by the
transport rollers [C].
At the same time, the pick-up motor starts again and the pick-up roller [D] is lifted up.
When the pick-up roller HP sensor turns on, the pick-up motor stops (see Pick-up
Roller Release).
B070D920.WMF
[B]
[D]
[A]
[C]