Filter
Top Products
User’s Manual 8-14
AV functions
Replacing the batteries
When the batteries in the Remote Controller reach the end of their life, the
Remote Controller may not operate correctly or work only within a short
distance from your computer. In this instance, you should purchase new
batteries and replace the discharged ones.
1. Open the battery cover on the back of the Remote Controller.
2. Replace the batteries.
Be sure to place the batteries with their polarities (+ and -) in the correct
position.
Figure 8-9 Removing the batteries
3. Close the battery cover.
Close the cover securely until it clicks.
Set-top box Connection Method and Watching TV on the
Media Center
This section explains how to connect the set-top box and configure settings
for watching TV.
Connecting the set-top box
Connect the computer and set-top box using the following procedure to
watch TV using the set-top box.
1. Connect the infrared transmitter cable to the computer. Please note that
the infrared remote control for your set-top box must be compatible in
order to function.
Figure 8-10 Connecting the infrared transmitter cable
Batteries
Infrared transmitter
cable port
Infrared transmitter cable