Filter
Top Products
98
The procedure here describes an installation on Windows 98. The procedures are same when
Windows 95 or Windows Me is used.
Windows 95/98/Me
REQUIREMENTS:
• The NetWare server is configured correctly and running on your network.
• The TCP/IP protocol is installed and configured correctly on your Windows computer.
(Required only when using the NetWare server 5.x in the TCP/IP network.)
• The Client for NetWare Networks and the IPX/SPX-compatible protocol are installed on your
Windows computer. (Required only when using the NetWere server in the IPX/SPX network.)
• The Service for NetWare Directory Services is installed. (Required only when using the
NetWare server in NDS or NDPS mode.
• You have an apropriate privilege to access to the NetWare server.
1
Open the NetWare server (when using in
bindery mode) or NDS directory tree (when
using in NDS or NDPS mode) in the Network
Neighborhood with the Windows Explorer, and
double-click on a queue.
• Select a queue depending on how you operate the
printing.
[given name]_direct - print jobs are sent straight to
the printer without spooling.
[given name]_hold - print jobs are held until users
operate copying or moving them to the Print queue
with the job management tools.
[given name]_print - print jobs are spooled to the
hard disk in the GA-1040 printer and print out. Use
this queue for a general printing.
• When using the NetWere 5.x in NDPS mode and the
printer drivers for each Operating System are
installed to a NDPS broker, the printer driver is
automatically installed.
• Unless using the NetWare 5.x in NDPS mode and
printer drivers for each Operating System are
installed to a NDPS broker, the Add Printer Wizard
screen appears. Continue to the next step.