Filter
Top Products
118
4
Select each option according to the
configuration of the GA-1040 printer and click
on [OK].
Pedestal Option
This sets whether or not the pedestal is installed.
Not installed - Select this when no pedestal is installed.
Pedestal 1 - Select this when the Paper Feed Pedestal (KD-1009) is installed.
Pedestal 2 - Select this when the Paper Feed Pedestal (KD-1009) and the Cassette Module
Device (MY-1017) are installed.
Large Capacity Feeder - Select this when the Large Capacity Feeder (KD-1010) is installed.
Finisher Option
This sets whether or not the finisher is installed.
Not Installed - Select this when no finisher is installed.
Hanging Finisher - Select this when the Hanging Finisher (MJ-1011) is installed.
Finisher - Select this when the Finisher (MJ-1012) is installed.
Saddle Stitch Finisher - Select this when the Saddle Stitch Finisher (MJ-1013) is installed.
Punch Unit
This sets whether or not the hole punch unit is installed. This can be selected when “Hanging
Finisher”, “Finisher” or “Saddle Stitch Finisher” is selected at “Finisher”.
Not Installed - Select this when no hole punch unit is installed.
2 Hole Punch Unit - Select this when the 2 Hole Punch Unit (MJ-6001E) is installed.
2/3 Hole Punch Unit - Select this when the 2/3 Hole Punch Unit (MJ-6001N) is installed.
4 Hole Punch Unit (F) - Select this when the 4 Hole Punch Unit (F) (MJ-6001F) is installed.
4 Hole Punch Unit (S) - Select this when the 4 Hole Punch Unit (S) (MJ-6001S) is installed.
5
Close the screen.