Filter
Top Products
68
1
Open the GA-1040 printer in the Network
Neighborhood with the Windows Explorer, and
double-click on a queue.
• Select a queue depending on how you operate the
printing.
Direct - print jobs are sent straight to the printer
without spooling.
Hold - print jobs are held until users operate copying
or moving them to the Print queue with the job
management tools.
Print - print jobs are spooled to the hard disk in the
GA-1040 printer and print out. Use this queue for a
general printing.
• The Printers screen appears.
Windows 95/98/Me
The procedure here describes an installation on Windows 98. The procedures are same when
Windows 95 or Windows Me is used.
2
Click on [Yes].
• The Add Printer Wizard screen appears.
: The Hold queue and Print queue are only available when the HDD option, PS3 & HDD
Upgrade (GE-1030), is installed.
: When the HDD option, PS3 & HDD Upgrade (GE-1030), is installed on your GA-1040
printer, the PostScript printer driver is automatically installed by following the procedure
here. If you want to install the PCL6 printer driver for SMB printing, install the printer
driver by Add Printer Wizard and set the GA-1040 print queue to the printer port. The
PCL6 printer driver for Windows 95/98/Me is included in the
“\English\Prntdrvr\Pcl6_drvr\Win_9x_ME” folder in the CD-ROM.