Filter
Top Products
SETTING UP THE
PROTOCOLS
41
7
Make sure [AUTO] is selected and press [SET].
• [AUTO] is selected as a factory default. If it is not
selected, press [AUTO] to select. When [AUTO] is
selected, the button should be shown as right figure.
• The screen returns to the PROTOCOL menu. Go to
Step 9.
9
Press [NETWARE].
• When using NetWare 4.x or NetWare 5.x in NDS/
NDPS mode, go to Step 10.
• When using NetWare 3.x or NetWare 4.x in bindery
mode, go to Step 12.
8
Press [AUTO] to deselect and press the
buttons of frame types to be used, and then
press [SET].
• The screen returns to the PROTOCOL menu.