Filter
Top Products
SETUP FLOW
7
For LPR Printing
The LPR Printing is only available for Windows NT 4.0, Windows 2000, and Windows XP.
Connecting the GA-1040
Connect the GA-1040 to your network with a network cable.
P13 “CONNECTING TO THE NETWORK”
Preparing to use the TopAccess
Set the TCP/IP protocol to use the TopAccess. When the printer is connected to the TCP/IP
network, you can use the TopAccess, a web-based utility, to remotely set up the printer from
your computer.
P16 “SETTING UP THE TCP/IP”
Setting up the Printing Service
Enable the LPD Printing Service using TopAccess.
P57 “SETTING UP THE LPD PRINTING”
Installing the Printer Driver
Install the printer drivers for the LPR Printing.
P78 “Installing the Printer Driver for LPR Printing”
Configuring the Options
Configure the option settings on the printer driver.
P109 “Configuring the Options”
For IPP Printing
The IPP Printing is only available for Windows 2000 and Windows XP.
Connecting the GA-1040
Connect the GA-1040 to your network with a network cable.
P13 “CONNECTING TO THE NETWORK”
Configuring the Options
Configure the option settings on the printer driver.
P109 “Configuring the Options”