Filter
Top Products
16
SETTING UP THE TCP/IP
After the printer is connected to the network, please set the TCP/IP to enable accessing the
TopAccess.
SUPPLEMENT:
TopAccess, a web-based utility, is used to configure the printer from your computer instead of
operating the setup from the Control Panel of the printer. It is recommended to use the
TopAccess to configure the printer settings when the printer is connected to the network
because some items cannot be operated from the Control Panel.
Please configure the TCP/IP settings appropriated for your network environment:
Assigning the TCP/IP using the DHCP, RARP, or BOOTP server
Where either DHCP, RARP, or BOOTP server is in the network, the printer can be configured to get
TCP/IP settings automatically from the server.
P17 Assigning the TCP/IP Settings Automatically
Assigning the TCP/IP manually
Where neither DHCP, RARP, nor BOOTP server is in the network, assign the static TCP/IP settings
manually.
P22 Assigning the TCP/IP Settings Manually
NOTE:
When using the DHCP, RARP, or BOOTP server to assign the IP address, the printer obtains
different IP address every time after you reboot the printer. It may cause the failure of printing
for the LPR Printing and IPP Printing because the IP address has been changed. In this case, it
is recommended to assign the static IP address manually.